monster beats

Autogate - Residential Auto Swing Gate

CMX Underground (909L)

TECHNO (SV 24 and SV 36)

Highlights
■ Has a larger area of friction in order to provide larger torque and thus become an advantage in moving heavy gates as it.
■ This latest clutch technology enable the gate to move smoother and firmer, especially at the fully open & close position. This also minimize vibration of the gate.
■ System allows the adjustment of the torque of the motor from above.This unique features enable the torque to synchronise with the weight of the gate. Thus prolonging the life span of the carbon brush in the DC motor, and the system as a whole.
■ Oil Bath and it lubricates the internal clutch and gear system completely.This again prolong durability of the system.
■ Mould from the finest aluminium die cast, and is furnished with quality anti-rust metalic paint in order to last.

Accessories

	SV 24	SV 36
Operating Voltage	24VDC	36VDC
Current Consumption (no load)	0.7Amp	1.5Amp
Motor Speed	4700 r.p.m.	3800 r.p.m.
Motor Output Power	25W	80W
Motor Torque (kg-cm)	2.8kg/cm	3.2kg/cm
Main Shaft Torque (kg-cm)	188kg/cm	280kg/cm
Gearbox Housing	Die-Cast Aluminium	Die-Cast Aluminium
Gearbox Lubrication	Gear Oil	Gear Oil
Drive Shaft Material	Case-hardened Steel	Case-hardened Steel
Gasket Material	Nitrile Rubber (NBR)	Nitrile Rubber (NBR)
Shalf Rotation Angle	360°	360°
Foundation Casing Material	Die-Cast Aluminium	Die-Cast Aluminium
Static Gate Weight	300kg	500kg
Maximum Length of Gate	4.5m	5.5m
Rotation Speed at 120°	9 sec	9 sec

DEA WING 302

For leafs up to 2m
WING 302: operator stroke 390, 230V ac, self-locking.
WING 303: operator stroke 390 with limit-switch in opening cycle, 230V ac, self-locking.

For leafs up to 2,5m *
WING 302R: operator stroke 390, 230V ac, not self-locking.
WING 303R: operator stroke 390 with limit-switch in opening cycle, 230V ac, not self-locking.
* always use with electric lock.

For leafs up to 3,5m
WING 302L: operator with extension, 230V ac, self-locking.
WING 303L: operator with extension and limit-switch in opening cycle, 230V ac, self-locking. WING 302RL: operator with extension, 230V ac, not self-locking.
WING 303RL: operator with extension and limit-switch in opening cycle, 230V ac, not self-locking.

For solutions in low voltage*
WING 302/24: operator stroke 390, 24V dc, self-locking, for leafs up to 2 m.
WING 302/24L: operator with extension, 24V dc, self-locking, for leafs up to 3,5 m.k.

Model	302-302L	302R	302/24
Power supply (V) (50/60 Hz)	230 AC	230 AC	230 AC
Motor power supply (V)	230 AC	230 AC	24 DC
Capacity (W)	300	300	110
Condenser incorporated (uF)	8	10	-
Protection level (IP)	44	44	44
Stroke (mm)	390	390	390
Max torque (Nm)	2200	2000	2000
Operating temperature (°C)	-20 / + 60	-20 / + 60	- 20 / + 60
Motor thermal protection (°C)	150	150	-
Duty cycle (%)	30	30	70
Opening time (sec. 90°)	20	17	20
Weight with packing (kg)	8,6	8,6	8,6

OAE 333-A (Stainless Steel)

DSPS 222AT

Technical Specification
Swing type auto-gate Driving Method
Operating Voltage
Motor Output Motor Amp. Piston displace Piston Speed Back-up Battery Safety Clutch
Safety Barrier Electric Controller Temperature Gear Box Manual Operation
Max. wrt of gate
Max. length of gate
Electro - mechanical screw driver piston type
DC 18 V for normal speed DC 12 V for ending speed
15 watt per arm
2.1
32 cm
2.9 cm/sec
12 volt. 7AH Rechargeable
Electric current sensing using Hi-Amp Auto-Reverse.
Infrared beam sensor (optional)
Micro-processor based
0 to 80°C
Three stages planetary reducer
Special released Key during power failure.
400 kg per wing with force adjustable
5 meters per wing

Swing type automatic gate control

Technical Specification
Driving method: Screw driven piston type
Operating voltage: DC24V for normal speed
DC 12V for cushioning speed
Max. Output power: 80W per driver
Max. Piston stroke: 30cm
Max. Piston speed: 3cm/sec.
Operating cycle: 10 second per 90 (approx)
Max. Weight of gate: 250kg per wing
Max. Length of gate: 3 meter per wing
DSPS device: Electronic timing tracker
Gearbox: Dual steps planetary reducer
Safety clutch: Electronic current sensing
Backup battery: 12V 7AH
Safety barrier: Infrared beam sensor (optional)
Main supply: AC 110V / 220V, 60Hz / 50Hz
Electronic controller: Microcomputer based
Remote controller: UHF Digital PWM type
Temperature: 0 to +80 C

COMPACT (Epicyclic Actuator)

LEADER (Actuator for Swing Gate)

Reliable and sturdy linear operator, extremely noiseless with an elegant and compact design. Structure in aluminium with polyester powder paint without T.G.I.C, QUALICOAT licensed. Self-locking mechanism and patented unclamping. Available in two versions: with inox tube and towing hand or with covered stroke and pivot

Max. weight per leaf	300kg
Max. length per leaf	4000mm
Max. Opening angle	120°
Stroke time	16/27 sec

Reliable, strong, safe: The leader of the range. Body in die cast aluminium, transmission pinion in bronze, self-lubrication endless screw, polyester powder paint without T.G.I.C., QUALICOAT licensed, Personalized unclamping key. Available in two versions: with inox tube and towing hand or with covered stroke and pivot.

Max. weight per leaf	400kg
Max. length per leaf	5000mm
Max. Opening angle	120°
Stroke time	16/27 sec

COMEX (SE 1)

COMEX (SE 2)

ACTUATOR
TYPE : A torque limiting drive unit with D.C. motor, speed reducer and Nylon Bush, which grips between an output shaft and arm connected to a gate. The pressure exerted by the bush and the shaft is adjustable by radially tightening the bush with screws system.

Motor Voltage Rating : 12-24V Direct Current, (D.C)
Power Consumption : 25 watt per Actuator
Motor Rated Load Speed : 4200 rpm
Insulation Resistance : 1.5 mega ohm
Closing Speed : 6-8 sec (from 90 angle)
Max. Leaf Opening Angle : 180*
Max. Leaf Weight Allowable: 200 kg
Driving Shaft : Nickel chrome plated solid steel shaft
Casing : Waterproof and rust resistance cast alloy
Trust Force : = 50 kg
External Dimension : 255mm(L) x 240mm(W) x125mm(H)

ACTUATOR ARM & BRACKET
TYPE : Nickel-chrome plated mild steel
Bearing Serial : Fuji-10-30A
Arm Dimension : 485mm(L) x 25mm(W) x 5mm(H)

CONTROL PANEL (5amp fuse)

Power supply is step down to 24V direct current to operate control panel, receiver, motors and electronic lock

Power Supply : 230VAC, 5Amps, 50 Hz
Motor Output : Two speed gate control 24V D.C. for fast speed and 12V D.C. for slow speed control by timer
Normal Operation : One or two gate-leaf control by the indoor pushbutton and remote control Battery backup with charges (Optional) Automatic lighting control available
External Dimension : 31 Omm(L) x 250mm(W) x Depth-60

TRANSMITTER AND RECEIVER
TYPE : Battery-operated, crystal controlled frequency. Modulated radiowave.
2 Channel / Remote Control Range : Effective-40m Passcode : Set by 8X3 ways switches easily accessible and changed by owner
Battery : Under normal usage, a 12V battery should last 6 months
Case Size : 50mm(L) x 35mm(W) x 12mm(H)

ONKO 450

ONKO 850 (Heavy Duty)

Specification
1. OPERATOR MAXIMUM DIRECT FORCE : 1200N
2. MAXIMUM POWER CONSUMPTION : 12V X 6A = 72W
3. DUTY CYCLE: 50%

Features
ELECTRONIC SAFETY
Anti-crushing protection is ensured by an electronic device installed on the control boards, which directly controlling operator drive torque. In case of an emergency, the release key makes it possible to operate the gate manually.
LESS MAINTENANCE, HIGHLY RELIABLE
Electro-Mechanical device cuts down considerably on maintenance. Reliability is assured under all atmospheric conditions and in an outdoor temperature range of-20°C to +55'C
MECHANICAL
• Self-locking in any position
• Second speed for soft stop
• Gate leaf direction can be both inward or outward
CONTROL
• Gate may be stopped in any position and move right or left with the one button switch
• Optional Auto- close function available with easy install external safety fotocells.

Specification of Motor

Maximum Gate Weight	250kgs (660lbs.)
Gate Operating Length	3m-4.5m(10ft-15ft)
Operator Linear Speed	21.8mm/sec (0.9in/sec)
Traveling Length	365mm(14.6in)
Maximum Swing Angle	120
90"OperatingTime	10'-12'sec
Motor Power	12VDC
Power Supply Available	110VAC+-10%60Hz

Specification

MAXIMUM GATE WEIGHT	450kg
OPERATING VOLTAGE	24vdc
CURRENT OUTPUT	80w
MOTOR OUTPUT	3.0A
MOTOR SPEED	1500RPM
OPERATOR LINEAR SPEED	12.8T
MAX. SWING ANGLE	800N.M
ARM SPEED	1.6cm/s
TRAVELING LENGTH	300mm
MAX. CYCLE	60 /hr
TEMPERATURE	-20°C~ +55°C